Product manual

turnIng on tHe vtrAK

With the power supplies connected, turn on both power switches on the back of the enclosure. When the power

is switched on, the LEDs on the right handle light up.

Once the VTrak A-Class startup tasks are completed and the unit is operational, observe the LED indicators on

the front right enclosure ear:

• Power,FRU,andLogicalDriveLEDsdisplaysteadygreen.

• EachcontrolleractivityLEDashesgreenwhenthereisactivityonthatcontroller.

• ThecontrollerheartbeatLEDblinksgreenoncepersecondforveseconds,goesdarkfortenseconds,

thenblinksgreenoncepersecondforvesecondsagain.

Steady means the LED is on.

Blinking means a regular on/off pattern.

Flashing means an intermittent and irregular on/off pattern.

VTrak A-Class Product Manual Promise Technologies