Product manual

nsPF FibrE ChannEL Data Path

To establish the data path:

Referring to the diagram “Fibre Channel NSPF conguration” on page 24, follow these steps to create a Fibre

Channel SAN conguration that will not have a single point of failure for the data paths.

1. Starting with the VTrak controller on the left, connect one or two Fibre Channel cables to one Fibre

Channel switch.

2. From the VTrak controller on the right, connect one or two Fibre Channel cables to the other Fibre

Channel switch.

3. Connect one Fibre Channel port of each client to one Fibre Channel switch and the other port to the other

switch.

Hardware Installation