Product manual

Drive carrier boom view
Drive carrier side view
5. Position the drive in the carrier so the mounting holes line up. The 3.5-inch drive mounting screws go
through the sides of the carrier.
6. Insert the screws through the proper holes in the carrier and into the drive.
• Install four screws per drive.
• Snug each screw. Be careful not to over tighten.
7. With the drive carrier handle in open position, gently slide the drive carrier into the enclosure.
Important
Press the release button to push the drive carrier into position.
Proper drive installation ensures adequate grounding and minimizes
vibration. Always attach the drive to the carrier with four screws.
237
Installing Physical Drives