Product manual

Disk carrier release button
Drive carrier front view
rePlaCing hard driVeS
The drive carrier accommodates 3.5-inch drives.
Cautions
Swing open the drive carrier handle before you insert the drive
carrier into the enclosure.
To avoid hand contact with an electrical hazard, remove only one
drive carrier a time.
1. Press the drive carrier release button. The handle springs open.
2. Grasp the handle and gently pull the empty drive carrier out of the enclosure.
3. Remove the four screws holding the failed hard drive in the carrier and remove the drive.
4. Carefully lay the new drive into the carrier with the power and data connectors facing away from the
carrier handle.
236
VTrak A-Class Product Manual Promise Technologies