Product manual

223
Management with CLI
syslog
Usage
syslog-a<action>[-i<index>][-s<settings>]
Summary
To congure the settings for syslog remote servers.
Options
-a<action> Whichactiontoperform.
listserver (Default)Displaysthecurrentsettingsoftheremotesyslog 
 servers.
addserver Addanewremotesyslogserver.
delserver Deleteanexistingremotesyslogserver.
modserver Modifythesettingsofanexistingremotesyslogserver.
-iindex Theindexofremotesyslogservers,rangingfrom1to4.
Thisoptionisvalidwhenmodifyinganexistingremotesyslogserversettingsorwhendeleting
aserver.
-s“<option>=<value>”
Thesettingsofoneremotesyslogserver.It’svalidonlywhenaddingaserverormodifyingthe
settings.
server= ServerIPordomainnameoftheremotesyslogserver.
 Thissettingisvalidonlywhenaddingtheserver.
port= TheUDPorTCPportnumber.Ifnotspecied,514isusedby
 default.
protocol= Networkingprotocol.Whenaddingaserver,ifthissettingisnot
 specied,“udp”isusedbydefault.Whenmodifyingaserver
 settings,ifthissettingisnotspecied,itmeansnochangetothe
 protocol.