Product manual

Cautions

• Donotpopulateanyunitwithharddrivesuntilithasbeensecurely

installedintherack.

• Atleasttwopersonsarerequiredtosafelylift,place,andattachthe

unitintoaracksystem.

• Donotliftormovetheunitbythehandles,powersuppliesorthe

controllerunits.Holdthesystemitself.

• Donotinstalltheunitintoarackwithoutrailstosupportthe

system.

• Onlyaqualiedtechnicianwhoisfamiliarwiththeinstallation

procedureshouldmountandinstalltheunit.

• Mounttherailstotherackusingtheappropriatescrewsandange

nuts,fullytightened,ateachendoftherail.

• Donotloadtherailsunlesstheyareinstalledwithscrewsas

instructed.

• TherailsavailableforthePROMISEVTrakunitaredesignedtosafely

supportthatPROMISEVTrakunitwhenproperlyinstalled.Additional

loadingontherailsisatthecustomer’srisk.

• PROMISETechnology,Inc.cannotguaranteethatthemountingrails

willsupportyourPROMISEVTrakunitunlessyouinstallthemas

instructed.

Caution

Tolightentheenclosure,removethepowersupplies,andremoveall

harddrivecarriers.Replacethepowersuppliesanddrivecarriers

aftertheunitismountedinyourrack.

rACK-mountIng tHe vtrAK enClosure

This section provides instructions for installing the VTrak A-Class enclosure in to a rack.

Hardware Installation