Product manual

195
Management with CLI
rc
Usage
rc[-a<action>][-l<LdId>]
rc-astart-l<LdId>[-n][-p]
rc-astop-l<LdId>
rc-apause-l<LdId>
rc-aresume-l<LdId>
Summary
The rc command starts, stops, pauses and resumes a Redundancy Check and monitors the
progress of a running Redundancy Check.
Options
-a<action> Speciesactiontoperform.
list (Default)DisplaysactiveandpausedRedundancyChecksand
 theirstatus.
start StartsaRedundancyCheck.
stop StopsaRedundancyCheck.
pause PausesaRedundancyCheck.
resume ResumesapausedRedundancyCheck.
-l<LdID> SpeciesthelogicaldriveIDonwhichtoruntheRedundancy
 Check.
-n Donotxinconsistentdata.ThisoptioncausesRedundancy
 Checktorunwithoutcorrectinginconsistentdata.Allinconsistency
 errorsarereported.
-p Pauseonerror.ThisoptioncausesRedundancyChecktopause
 whenitencountersinconsistentdata.Thedefaultistocontinueon
 error.
Examples
ptiash-t-s192.168.1.1-ffw_multi.ptif-p69#forembedded
ptiash-ffw_multi_20031010.ptif#forin-band
ptiash-l#listcurrentlyrunningashprocess
ptiash-t-s192.168.1.1-ftemp/fw_multi.ptif
#iftheashimageislocatedunderthe“temp”folderontheTFTPserver.
ptiash-t-s192.168.1.1-fpd_fw.ptif-d1,2
#updatethepdrmwareforpd1and2usingthepd_fw.ptifimage.