Product manual

181
Management with CLI
Options
-a<action> Whichactiontoperform.
list (Default)Displaysthemigrationstatusofspecieddiskarray.Ifno
 arrayIDspecied,allmigrationstatuswillbedisplayed.
start startaspecicmigrationprogress.
-d<DAID> UsedtospecifythearrayIDformigration.
-p<PDIDlist> Usedtospecifywhichphysicaldrivesaretobeaddedinanarray.
-l“<option>=<value>” Usedtospecifysettingsforlogicaldrivemigration.
id= (Required)SpeciesthelogicaldriveID.
capacity= Speciesthenewlogicaldrivecapacity.
 Nottospecifyitunlessintendingtoexpandthecapacity
capacityrounding= Enableordisablecapacityroundingforlogicaldrive
migration
enable (Default)Enablecapacityrounding.
disable Disablecapacityrounding.
raid= SpeciesthenewlogicaldriveRAIDlevel.
axle= SpeciestheaxlenumberforhybridRAIDLevelswhenRAID
 Levelischanged.
stripe= Speciesthenewlogicaldrivestripesize.
 Thisiscurrentlynotsupportedandisignored.