Product manual

163
Management with CLI
init
Usage
init[-a<action>][-l<LdId>]
init-astart-l<LdId>[-q<size>][-p<pattern>]
init-astop-l<LdId>
init-apause-l<LdId>
init-aresume-l<LdId>
Summary
The init command starts, stops, pauses, and resumes a logical drive initialization. A full
initialization writes to the entire logical drive space and can takes several minutes, depending
on the size of the logical drive.
A quick initialization writes to the rst and last few megabytes of the logical drive. Typically,
a quick initialization is completed in a few minutes.
Options
-a<action> Speciestheactiontoperform.
list Displaysalistoftheinitializationprocessesinprogressorpaused
 andtheirstatus.Thedefaultaction.
start Startaninitialization.
stop Stopaninitialization.
pause Pauseaninitialization.
resume Resumeaninitialization.
-l<LDID> Speciesthelogicaldrivetobeinitialized.
-q<size> (1-1024)Speciestheamountofdatainmegabytes(MB)fora
 quickinitialization.