Product manual

149
Management with CLI
allinitiators Displayinitiatorlistfrombreswitch.
-i<ctrlId> ControllerId.Defaulttobeallavailablecontrollersforlistingif-iis
 notspecied.Defaulttobecontroller1formodifyingif-iisnot
 specied.
-p<portid> PortId.Defaulttobeallportsforlistingif-pisnotspecied.
 Defaulttobeport1formodifyingif-pisnotspecied.
-s“<option>=<value>” SpeciesFibreChannelsettingstochange.
linkspeed= FibreChannellinkspeed.
2gb 2GB/s
4gb 4GB/s
8gb 8GB/s
auto Automatic
topology= FibreChanneltopologymethod.
nlport NL-Port
nport N-Port
auto Automatic
hardalpa= HardArbitratedLoopPhysicalAddress(ALPA)
0..255 Value255willdisablehardALPA.
-v Verbosemode.Usedwith-alist.
Examples
fc
fc -t port -v
fc -a mod -t port -p 1 -s “linkspeed=2gb”
fc -a reset -i 1 -p 2