Product manual

111
Management with CLI
 enable  Thedefaultisenable.
 disable
pdm= EnablesordisablesPDMforthisarray.
 enable Thedefaultisenable.
 disable
-l“<option>=<value>” Specieslogicaldrivesettingswhenaddingalogicaldrivetoan
 existingarray(addld)orduringarraycreation(add).Optionsare
 commaseparated.
<LDIDlist> SpeciesalistofLogicalDriveIDs.Requiresthe-adelldoption.
ID= AssignsaspecicIDtoanarray.OverridesautomaticID 
 assignment.Validvaluesare0-255.
Alias= Auser-speciednameforthelogicaldrive.
Raid= SpecieslogicaldriveRAIDlevel.
0 Striping.
1 Mirroringontwodrives.
5 Parity,requiring3ormoredrives.
10 Mirroringonevennumberofdrives.
1e Extendedmirroring,requiring2ormoredrives.
50 StripingonmultipleRAID5,requiring6ormoredrives.
6 Allowtwodrivefailure,requiring4ormoredrives.
60 StripingonmultipleRAID6,requiring8ormoredrives.
Capacity= Specieslogicaldrivecapacity.Canbespeciedinmegabytes
 (mb),gigabytes(gb)orterabytes(tb),upto2decimalplaces.If
 notspecied,allavailablecapacityisusedforthislogicaldrive.