Product manual

102
VTrak A-Class Product Manual Promise Technologies
mAnAgIng wItH tHe ClI
making a Serial COnneCtiOn
Before you begin, be sure the RJ11-to-DB9 serial data cable is connected between the Host
PC and VTrak and that both machines are booted and running.
Serial ports on the controllers
Then do the following actions:
1. Change your terminal emulation program settings to match the following specications:
• Bitspersecond:115200
• Databits:8
• Parity:None
• Stopbits:1
• Flowcontrol:none
2. Start your PC’s terminal VT100 or ANSI emulation program.
3. Press Enter once to launch the CLI.