Product manual

98
VTrak A-Class Product Manual Promise Technologies
aCCEss thE LiCEnsE uPDatE wizarD
If you chose to skip the license activation in the initial setup, use the License Update procedure to activate the
license. The le system wizard used to create the network le system is not available until the license is activated.
To use the License Update Wizard:
1. Go to Administrator > Product link (in left panel).
2. Click on the Gear icon and choose the Update License or Activate License option. The Update
License Wizard menu appears.
For a description of how to update or activate the product license, please see “License Activation” on page
42.
PrOduCt regiStratiOn and liCenSe management
It is necessary to activate the product license and keep it up to date in order to create and use the shared
network le system or le systems with the VTrak A-Class.
Product Registration is not required, but is strongly encouraged. Registering the new VTrak helps the PROMISE
support staff to improve service quality. If you chose to skip registration when rst setting up the VTrak, please
take a few minutes to follow the steps below and register your VTrak and other PROMISE systems that have not
yet been registered.
onLinE LiCEnsE uPDatE anD vtrak rEgistration
The VTrak A-Class offers the option of activating and updating the product license online. In order to use the
online update option or to register the VTrak thorough the management user interface , the system must be able
to connect to the Internet. If you have not yet change the network settings for Internet connection, go to SAN
> Network Management and change the Virtual Management Port settings for IP address, Gateway and DNS
to allow an Internet connection. See “VTrak Network Management” on page 81.