Product manual

Chapter 4: Management with WebPAM PROe
61
Log-in/Log-out
Log-in to WebPAM PROe
1. Launch your Browser.
2. In the Browser address field, type in the IP address of the VTrak
Management port. See “Chapter 3: Setup” on page 29.
Note that the IP address shown below is only an example. The IP address
you type into your browser will be different.
Regular Connection
• WebPAM PROe uses an HTTP connection. . . . . . . . . . . . . . . .http://
• Enter the VTrak’s Management Port IP address . . . 192.168.10.148
Together, your entry looks like this:
http://192.168.10.148
Secure Connection
• WebPAM PROe uses a secure HTTP connection. . . . . . . . . .https://
• Enter the VTrak’s Management Port IP address . . . 192.168.10.148
Together, your entry looks like this:
https://192.168.10.148
Note
Whether you select a regular or a secure connection, your login to
WebPAM PROe and your user password are always secure.