Product manual

VTrak M-Class Product Manual
60
Figure 4. VTrak M300f/i/p and M200f/i/p disk carrier LEDs
The VTrak spins up the disk drives sequentially in order to equalize power draw
during start-up. After a few moments the Power/Activity and Disk Status LEDs
should display green.
See “Critical & Offline Disk Arrays” on page 280 for a discussion of rebuilding and
failed disk drives.
Audible Alarm
VTrak’s audible alarm has four sound patterns:
• Beep. Beep. Beep. – Indicates that a logical drive is rebuilding
• Beep-beep, beep-beep, beep-beep. – Indicates that a logical drive is critical
• Beep-beep-beep. Beep-beep-beep. – Indicates a problem with a field
replaceable unit (FRU)
• 10 second continuous beep – Indicates that a logical drive is offline
See “Chapter 6: Maintenance” on page 209 for more information about field-
replaceable components.
See “Critical & Offline Disk Arrays” on page 280 for a discussion of critical and
offline logical drives.
To make alarm settings, see “Buzzer” on page 119.
LEDs
State
Dark
Steady
Green
Flashing
Green
Amber Red
Power/
Activity
No Drive
Drive
Present
Activity n/a n/a
Status
No Power/
No Drive
Drive OK n/a
Drive
Rebuilding
Drive
Error
“n/a” means this state does not apply to this LED.
Disk Status
Power/Activity