Product manual

255
Chapter 8: Troubleshooting
• VTrak is Beeping (below)
• LEDs Display Amber or Red (page 256)
• CLU Reports a Problem (page 262)
• WebPAM PROe Reports a Problem (page 263)
• LEDs Display Amber or Red (page 256)
• Event Notification Response (page 265)
• Critical & Offline Disk Arrays (page 280)
• Enclosure Problems (page 283)
• Connection Problems (page 286)
• Unsaved Data in the Controller Cache (page 289)
This Chapter covers troubleshooting procedures for VTrak.
VTrak is Beeping
VTrak’s audible alarm has four sound patterns:
• Beep. Beep. Beep. – Indicates that a disk array is rebuilding
• Beep-beep, beep-beep, beep-beep. – Indicates that a disk array is critical
• Beep-beep-beep. Beep-beep-beep. – Indicates a problem with a field
replaceable unit (FRU)
• 10 second continuous beep – Indicates that a disk array is offline
See “Critical & Offline Disk Arrays” on page 280.
See “Back of Enclosure” on page 259 for more information on FRUs.