Product manual
VTrak M-Class Product Manual
204
• Session Time Out – 24 minutes is the default. 1440 minutes = 24 hours
• Maximum number of connections – 4 is the default
4. Press Ctrl-A to save your settings.
To start, stop or restart the Telnet service, highlight Start, Stop or Restart and
press Enter.
SNMP
1. Highlight SNMP and press Enter.
2. Highlight Startup Type and press the spacebar to toggle between Automatic
and Manual.
3. Highlight the following and press the backspace key to erase the current
value, then type the new value:
• Port Number – 161 is the default
• System Name – (optional) Type a system name in this field
• System Location – Type a country name in this field
• System Contact – Type the email address of your system administrator
in this field
• Read Community – Type a community name in this field
• Write Community – private (no change possible)
4. Press Ctrl-A to save your settings.
To start, stop or restart the SNMP service, highlight Start, Stop or Restart and
press Enter.
SNMP Trap Sinks
1. Highlight SNMP and press Enter.
2. Highlight Trap Sinks and press Enter.
A list of the current trap sinks appears.
To add a trap sink:
1. Highlight Create New Trap Sink and press Enter
2. Highlight Trap Sink IP address and press the backspace key to erase the
current value, then type the new IP address in this field.
3. Highlight Trap Filter and press the spacebar to toggle through the severity
levels.
The Severity Levels are (lowest to highest) Information, Warning, Minor,
Major, Critical and Fatal.
4. Press Ctrl-A to save the Trap Sink.
To delete a trap sink: