Product manual

Chapter 5: Management with the CLU
203
5. The following items are optional but recommended. Highlight and press the
backspace key to erase the current value, then type the new value:
• Sender’s email address
• Subject Line for the email message
6. Press Ctrl-A to save your settings.
To start, stop or restart the Email service, highlight Start, Stop or Restart and
press Enter.
SLP
1. Highlight SLP and press Enter.
2. Highlight Startup Type and press the spacebar to toggle between Automatic
and Manual.
3. Press Ctrl-A to save your settings.
To start, stop or restart the Email service, highlight Start, Stop or Restart and
press Enter.
Webserver
1. Highlight Webserver and press Enter.
2. Highlight Startup Type and press the spacebar to toggle between Automatic
and Manual.
3. Highlight the following and press the backspace key to erase the current
value, then type the new value:
• HTTP Port – 80 is the default
• Session Time Out – 24 minutes is the default. 1440 minutes = 24 hours
4. Highlight SSL and press the spacebar to toggle between Enabled and
Disabled.
5. Highlight HTTPS Port and press the backspace key to erase the current
value, then type the new value. 443 is the default.
6. Press Ctrl-A to save your settings.
To start, stop or restart the Webserver service, highlight Start, Stop or Restart and
press Enter.
Telnet
1. Highlight Telnet and press Enter.
2. Highlight Startup Type and press the spacebar to toggle between Automatic
and Manual.
3. Highlight the following and press the backspace key to erase the current
value, then type the new value:
• Port number – 2300 is the default