Product manual

VTrak M-Class Product Manual
200
User Management
Each user types their user name and password to log into the CLI.
1. From the Main Menu, highlight Additional Info and Management and press
Enter.
2. Highlight User Management and press Enter.
A list of the current users appears.
Create New User
1. Highlight Create New User and press Enter.
2. Highlight each field and type in the appropriate information:
• User name (no spaces)
• Password (Optional. Maximum 32 characters. Use letters, numbers,
space between words and underscore)
• Display name (Optional)
3. Highlight Privilege and press the space bar to toggle though the options:
• Super – Allows the user full access to all functions including create and
delete users and changing the settings of other users, and delete disk
arrays and logical drives. The default “administrator” account is a Super
User.
• Power – Allows the user to create (but not delete) disk arrays and
logical drives, change RAID levels, change stripe size; change settings
of such components as disk arrays, logical drives, physical drives and
the controller.
• Maintenance – Allows the user to perform maintenance tasks including
Rebuilding, PDM, Media Patrol and Redundancy Check.
• View – Allows the user to see all status and settings but not to make any
changes.
4. Highlight Status and press the space bar to toggle between the options:
• Enabled – Allows the user to log in to the system
• Disabled – Prevents the user from logging in to the system
5. Press Ctrl-A to save the user.
Password
Each user can change their own password. A Super user can change other
user’s passwords.
1. Highlight a User in the list and press Enter.
2. Highlight Change Password... and press Enter.
3. Highlight New Password and type the password.
4. Highlight Retype Password and type the password again to verify.