Product manual

VTrak M-Class Product Manual
198
Delete Spare Drive
1. Highlight the spare drive you want to delete and press the spacebar to mark
it.
The mark is an asterisk (*) to the left of the listing.
2. Highlight Delete Marked Spare Drives and press Enter.
3. Press Y to confirm the deletion.
LUN Mapping (Fibre Channel and iSCSI)
1. From the Main Menu, highlight Additional Info and Management and press
Enter.
2. Highlight LUN Mapping and press Enter.
A list of the current iSCSI or Fibre Channel initiator appears.
LUN Mapping must be enabled in order for VTrak to recognize the initiator. If LUN
Mapping is currently disabled, highlight Enable LUN Mapping and press Enter.
Create New Initiator
1. Highlight Create New Initiator and press Enter.
2. Type the name of the initiator.
Obtain the initiator name from the initiator utility on your host system. The
initiator name must match exactly the initiator’s name setting from the host
side in order for the connection to work.
A Fibre Channel initiator name is the World Wide Port Name of the device
and is composed of a series of eight, two-digit hexadecimal numbers,
separated by a dash (-).
An iSCSI initiator name is the iSCSI name of the initiator device and is
composed of a single text string.
3. Press Ctrl-A to save the initiator.
Caution
If the spare drive you delete is the only spare, the controller will not
rebuild a critical array until you provide a new spare drive.
Note
LUN Mapping must be enabled in order for VTrak to recognize the
initiator.