Product manual

VTrak M-Class Product Manual
196
The log of NVRAM Events appears. Events are added to the top of the list.
Each item includes:
• Sequence number – Begins with 0 at system startup.
• Device – Disk Array, Logical Drive, Physical Drive by its ID number.
• Severity – (lowest to highest) Information, Warning, Minor, Major,
Critical and Fatal
• Timestamp – Date and time the event happened.
• Description – A description of the event in plain language.
3. Press the up and down arrow keys to scroll through the log.
To clear the NVRAM event log:
1. Highlight Clear NVRAM Event Log and press Enter.
2. Press Y to confirm.
Additional Info and Management
Additional Info and Management includes these functions: Spare Drive
Management, LUN Mapping, User Management, Software Management, Flash
through TFTP, Clear Statistics, Restore Factory Defaults and Shutdown/Restart.
Spare Drive Management
1. From the Main Menu, highlight Additional Info and Management and press
Enter.
2. Highlight Spare Drive Management and press Enter.
A list of the current spare drives appears. The following parameters are
included:
• ID number
• Operational Status
• Physical Drive ID number
• Configured Capacity
• Revertible – The drive can be returned to spare status after it is used to
rebuild a disk array
• Type – Global (all disk arrays) or Dedicated (to a specific disk array)
Create New Spare Drive
Only unconfigured physical drives can be used to make spares. Check your
available drives under Physical Drive Management.
1. Highlight Create New Spare Drive and press Enter.