Product manual

Chapter 5: Management with the CLU
193
3. Type Ctrl-A save your settings.
To set Termination for the VTrak SCSI controller “Out” connectors:
1. Highlight Termination Control.
2. Press the spacebar to toggle between Automatic, On and Off,
3. Type Ctrl-A save your settings.
Target Information
1. From the Main Menu, highlight SCSI Management and press Enter.
2. Highlight one of the SCSI ports to select it and press Enter.
3. Highlight Target Info and press Enter.
This screen displays a list of the 16 SCSI Targets for the selected SCSI channel.
To see information and statistics on an enabled SCSI Target, highlight the Target
you want to see and press Enter.
Background Activity
Background activity refers to any of several functions that take place in the
background while normal operation of the VTrak continues.
From the Main Menu, highlight Background Activity and press Enter. A count of
current background activities appears, including:
• Rebuild
•PDM
Note
You must reboot the VTrak for new settings to become effective.
Cautions
• Turn off termination only when the VTrak is NOT the last
device in the SCSI chain.
• Internal termination only works on the “Out” SCSI connectors.
Note
Enable Targets in the SCSI Channel Settings screen.