Product manual

Chapter 5: Management with the CLU
191
2. Highlight iSCSI SLP Options and press Enter.
3. Highlight SLP Port 1 or Port 2 and press Enter.
SLP Port information appears.
4. Highlight SLP and press the spacebar to toggle between Enabled and
Disabled.
When enabled, you must indicate whether to use a Directory Agent.
5. Highlight Use Directory Agent (DA) and press the spacebar to toggle
between Yes and No.
6. Highlight Auto DA IP and press the spacebar to toggle between Yes and No.
7. If you specified No, highlight Directory Agent IP and press the backspace
key to erase the current value, then type the new value.
8. Press Ctrl-A to save your settings.
CHAP
1. From the Main Menu, highlight iSCSI Management and press Enter.
2. Highlight iSCSI CHAPs and press Enter.
A list of the current CHAPs appears.
Add a CHAP
1. Highlight Create New CHAP Entry and press Enter.
2. Highlight name and type a name for the CHAP.
3. Highlight CHAP type and press the spacebar to toggle between Peer and
Local.
Peer is one-way, Local is bi-directional.
4. Highlight Secret and type a name of 16 or more characters.
5. Highlight Retype Secret and type the secret again to verify.
6. Press Ctrl-A to save the CHAP.
Delete a CHAP
1. Highlight the CHAP you want to delete and press Enter to mark it.
The mark is an asterisk (*) to the left of the listing.
2. Highlight Delete Marked Entries and press Enter.
3. Press Y to confirm the deletion.
Ping
This function enables you to ping other network nodes (PCs, servers, etc.)
through VTrak’s iSCSI ports.
1. From the Main Menu, highlight iSCSI Management and press Enter.