Product manual

VTrak M-Class Product Manual
186
iSCSI Port Settings
This feature applies to VTrak iSCSI models only.
1. From the Main Menu, highlight Network Management and press Enter.
2. Highlight the iSCSI port you want and press Enter.
3. Highlight NetMgmt iSCSI Port Settings and press Enter.
The settings screen appears. You can enable DHCP or make settings
manually.
DHCP
If you enable DHCP, IP Address, Subnet Mask and Gateway are set
automatically.
1. Highlight DHCP and press the spacebar to toggle to Enabled.
2. Press Ctrl-A to save your settings.
Manual
1. Highlight DHCP and press the spacebar to toggle to Disabled.
2. Highlight each of the following and press the backspace key to erase the
current value, then type the new value.
• IP Address
• Subnet Mask
• Default Gateway IP Address
• DNS Server IP Address
3. Press Ctrl-A to save your settings.
Fibre Channel Management
Fibre Channel Management deals with all Fibre Channel settings. This feature
appears only with VTrak Fibre Channel models.
Node
These functions affect both VTrak Fibre Channel ports.
1. From the Main Menu, highlight Fibre Channel Management and press Enter.
2. Highlight Fibre Channel Node and press Enter.
Node information appears. There are no user settings on this screen.
Ports
These functions affect both VTrak Fibre Channel ports.
1. From the Main Menu, highlight Fibre Channel Management and press Enter.