Product manual

Chapter 4: Management with WebPAM PROe
123
• Statistics Collection Time – Time and date you clicked the Statistics link to
display this data
Identify a Physical Drive
To identify physical drive in the VTrak subsystem enclosure:
1. Click the Subsystem icon in Tree View.
2. Click on the Enclosures icon.
3. Click on the Enclosure icon.
4. Click on the Physical Drives icon.
5. Click on a Physical Drive icon.
6. In Management View, click on the physical drives in the graphic.
The Disk Status LED will flash to identify the carrier holding the drive.
Figure 11. VTrak M500f/i/p disk carrier LEDs
Figure 12.VTrak M300f/i/p and M200f/i/p disk carrier LEDs
Physical Drive Settings
The Physical Drive–Settings tab enables you to specify an alias for a physical
disk drive. To make physical drive settings:
1. Click the Subsystem icon in Tree View.
2. Click on the Enclosures icon.
3. Click on the Enclosure icon.
4. Click on the Physical Drives icon.
5. Click on a Physical Drive icon.
Disk Status
Disk Status