Product manual

VTrak M-Class Product Manual
116
Figure 8. The VTrak M300i/M200i is shown above. The VTrak M300f/p and
M200f/p are similar.
Enclosure
Enclosure Information
The Enclosure–Information tab provides a diagram showing the status and
location of key components. Status information about the VTrak subsystem
enclosure, including:
• SEP Firmware Version
• Polling Interval*
• Enclosure Warning and Critical temperature thresholds*
• Controller Warning and Critical temperature thresholds*
• Power Supply Units – Device ID, Status, Fan status and Fan speed
• Blowers (scroll fans in the cooling unit(s) – Device ID, Status and Speed
• Voltage Sensors – 3.3V, 5.0V and 12.0V
• Temperature Sensors – The number of sensors varies among VTrak models
To access Controller information:
1. Click the Subsystem icon in Tree View.
2. Click on the Enclosures icon.
3. Click on the Enclosure icon.
For information on Enclosure problems, see
iSCSI 1 iSCSI 2
IOIOI
Controller
Mgmt
Cooling Unit
with Battery
Power Supply 1 RAID
Controller
Power Supply 2Storage
Enclosure
Processor
(SEP)