Product manual

Chapter 4: Management with WebPAM PROe
111
To identify the VTrak subsystem housing this controller:
1. Click the Subsystem icon in Tree View.
2. Click the Controllers icon.
3. Click on the Locate Controller button.
The Controller Status LED and Dirty Cache LED on the back of the
Controller, will flash for one minute. See the illustration below.
Figure 6. The Controller Status and Dirty Cache LEDs flash for one minute
so you can identify the Controller
Controller
Controller Information
The Controller–Information tab provides information about a specific VTrak
subsystem controller. This information is useful for maintenance and
troubleshooting. To access Controller information:
1. Click the Subsystem icon in Tree View.
2. Click the Controllers icon.
3. Click on the Controller icon.
LEDs (Fibre Channel)
LEDs (iSCSI)
LEDs (SCSI)