Product manual

VTrak M-Class Product Manual
108
This user settings are applied to this VTrak subsystem.
Firmware Update
The Software Management–Firmware Update tab enables you update the
firmware on the VTrak subsystem. See “Firmware Update – WebPAM PROe” on
page 211 for this procedure.
Restore Factory Defaults
VTrak includes a function to restore the default settings to its Firmware and
Software settings.
To access the Restore Defaults feature:
1. Click the Subsystem icon in Tree View.
2. Click the Administrative Tools icon.
The Administrative Tools list appears.
3. Click the Restore Factory Defaults link at the bottom of the list in
Management View.
The Restore Factory Defaults screen appears.
4. Check the Firmware and Software functions you want to restore to default
settings.
5. Click on the Submit button.
6. In the confirmation box, type the word confirm in the field provided.
7. Click the OK button.
The functions you selected will be automatically restored to their default settings.
Clear Statistics
The Clear Statistics function clears statistical data on controllers, physical drives
and logical drives. To clear statistical data:
Note
The Decryption box is grayed out. Decryption is always enabled.
Caution
The action of restoring default settings can disrupt your VTrak
functions. Use this feature only when necessary and only on the
settings that must reset to default in order to set them correctly.