User Manual

SettIng-uP wIth the clI
Setting up the Vess R2000 in the CLI includes these actions:
• “MakingSubsystemDateandTimeSettings(CLI)”onpage71
• “VirtualManagementPortSettings(CLI)”onpage72
• “MakingVirtualManagementPortSettings–Automatically(CLI)”onpage72
• “MakingVirtualManagementPortSettings–ManuallyunderIPv4(CLI)”onpage73
• “MakingVirtualManagementPortSettings–ManuallyunderIPv6(CLI)”onpage74
• “MaintenanceModeSettings(CLU)”
• “MakingMaintenanceModeSettings–Automatically(CLU)”
• “MakingMaintenanceModeSettings–ManuallyunderIPv4(CLU)”
• “MakingMaintenanceModeSettings–ManuallyunderIPv6(CLU)”
MakiNg subsysteM date aNd tiMe settiNgs (cli)
To set the subsystem date and time:
1. Type date -a mod -d and the date in yyyyy/mm/dd format then press Enter.
administrator@cli> date -a mod -d 2013/03/25
2. Type date -a mod -t and the time in hh:mm:ss format, then press Enter.
administrator@cli> date -a mod -t 14:50:05
You can combine date and time settings, such as:
administrator@cli> date -a mod -d 2013/03/25 -t 14:50:05
71
Product Manual Setup