User Manual

Serial port connecon
Use the RJ-11 serial port on the
controller module to establish the serial
communication link. The Vess R2600 is
shipped with an RJ-11 to DB9 adapter to
be used for this purpose.
MAkIng SeRIAl cABle connectIonS
Serial communication enables the terminal emulation application on your host PC or server to access the Vess
Command Line Interface (CLI) to set up a network connection. The Vess R2000 Series package includes one
RJ11-to-DB9 serial data cable for each controller.
To set up a serial cable connection:
1. Attach the RJ-11 end of the serial data cable to the RJ-11 serial connector on one of the RAID controllers.
2. Attach the DB9 end of the serial data cable to a serial port on the host PC or server.
57
Product Manual Hardware Installation