User Manual

673
Product Manual Appendix: Useful Information
APPenDIx: uSeful InfoRMAtIon
The appendix covers the following topics:
• SNMPMIBFiles(below)
• AddingaSecondRAIDController(page445)
• InstallingaSecondRAIDController(page446)
snMP Mib files
PROMISE supplies two MIB les to integrate the Vess R2000 subsystem into your SNMP system. These les are
in the SNMP folder on the Software CD.
The MIB les are:
• FCMGMT-MIB.mib
• raidv4.mib
For help loading the MIB les, see the instructions that came with your MIB browser.
addiNg a seCoNd raid CoNtroller
If your Vess R2000 subsystem shipped with one RAID controller, you can add a second RAID controller. The
second controller must have:
•
Thesamermwareversionasthecurrentlyinstalledcontroller
• ThesameamountofSDRAMasthecurrentlyinstalledcontroller
To obtain information for the currently installed RAID controller:
1. Click the Device tab.
2. Click the Component List icon.
3. Click the Controller and click the View button.
4. On the Information tab, note the Firmware Version.
5. Click the Advanced information tab.
6. Note the Slot 1 and Slot 2 Memory Size.