User Manual

Vess R2000 Series Product Manual Promise Technologies
System Setup 65
setting-up the seRiAl connection 66
About ip ADDResses 67
deFault ip addresses 67
ChoosiNg dhCp or a statiC ip address 68
aCCessiNg the MaC address iN the Cli 69
aCCessiNg the MaC address iN the Clu 70
setting-up with the cli 71
MakiNg subsysteM date aNd tiMe settiNgs (cli) 71
Virtual MaNageMeNt port settiNgs (cli) 72
MAking virtuAl MAnAgeMent POrt settings – AutOMAticAlly (cli) 72
MAking virtuAl MAnAgeMent POrt settings – MAnuAlly under iPv4 (cli) 73
MAking virtuAl MAnAgeMent POrt settings – MAnuAlly under iPv6 (cli) 74
MaiNteNaNCe Mode settiNgs (Cli) 75
MAking MAintenAnce MOde settings – AutOMAticAlly (cli) 75
MAking MAintenAnce MOde settings – MAnuAlly under iPv4 (cli) 77
MAking MAintenAnce MOde settings – MAnuAlly under iPv6 (cli) 79
setting up with webpAM pRoe 81
loggiNg iNto webpaM proe 81
cReAting Disk ARRAys AnD logicAl DRiVes 84
autoMatiC CoNFiguratioN 85
adVaNCed CoNFiguratioN 86
steP 1 – disk ArrAy creAtiOn 86
steP 2 – lOgicAl drive creAtiOn 87
steP 3 – sPAre drive creAtiOn 88
steP 4 – suMMAry 88
eNabliNg luN MappiNg aNd MaskiNg 89
loggiNg out oF webpaM proe 90
usiNg webpaM proe oVer the iNterNet 90