User Manual

661
Product Manual Troubleshooting
Reported Event Corrective Action
Rebuild
Rebuild is started
Noactionisrequired.
Rebuild is in progress
Rebuild is completed
Rebuild is paused
Resumerebuildwhenready.
Rebuild is resumed
Noactionisrequired.
Rebuild is stopped
Ifthisactionwasnotintentional,checkthe
logicaldrive’sstatus.
Rebuild stopped internally
ContactTechSupport.
Rebuild is aborted
ReducesystemloadontheVess.
Rebuild is queued
Noactionisrequired.
Auto rebuild cannot start
Installatargetphysicaldriveofadequate
capacity.
Redundancy Check
Redundancy Check is started
Noactionisrequired.
Redundancy Check is completed
Redundancy Check is paused
ResumeRedundancyCheckwhenready.
Redundancy Check is resumed
Noactionisrequired.
Redundancy Check is stopped
Redundancy Check is aborted due to internal
error
ReducesystemloadontheVess.
Redundancy Check encountered inconsistent
block(s)
CheckthediskdrivechecktableafterRC
andreplacediskdriveasneeded.
Redundancy Check task is queued
Noactionisrequired.
Redundancy check is in progress
Redundancy Check task is stopped internally
Restorethediskarraytofunctionalstatus.
Redundancy check is started on
unsynchronized logical drive
Noactionisrequired.