User Manual

650
Vess R2000 Series Product Manual Promise Technologies
Reported Event Corrective Action
Fibre Channel
Fibre Channel controller has detected bus
reset
Ifthismessageappearsrepeatedly,contact
TechSupport.
Fibre Channel controller has received a
“LUN reset” command.
Noactionisrequired.
Fibre Channel controller has encountered
a fatal error
RestarttheVess.Ifthismessageappears
repeatedly,contactTechSupport.
Fibre Channel link is up
Noactionisrequired.
Fibre Channel link is down
Fibre Channel controller settings have
changed
Firmware Update
Firmware update is started
Noactionisrequired.
Firmware update is complete
Firmware update is fail
Trytheupdateagain.Ifthismessagerepeats,
contactTechSupport.
Back-end expander rmware upgrade is
started
Noactionisrequired.
Back-end expander rmware upgrade is
completed
Back-end expander rmware upgrade
failed
Trytheupdateagain.Ifthismessagerepeats,
contactTechSupport.
Front-end expander rmware upgrade is
started
Noactionisrequired.
Front-end expander rmware upgrade is
completed
Front-end expander rmware upgrade
failed
Trytheupdateagain.Ifthismessagerepeats,
contactTechSupport.