User Manual

Drive carrier boom view
Drive carrier side view
5. Position the drive in the carrier so the mounting holes line up.
• 2.5-inchdrivemountingscrewsgothroughthebottomofthecarrier.
• SAS-to-SATAadaptermountingscrewsgothroughthebottomofthecarrier.
• 3.5-inchdrivemountingscrewsgothroughthesidesofthecarrier.
6. Insert the screws through the proper holes in the carrier and into the drive or adapter.
• UsethescrewssuppliedwiththeshipmentortheSAS-to-SATAadapter.
• Installfourscrewsperdrive.
• Installtwoscrewsperadapter.
• Snugeachscrew.Becarefulnottoovertighten.
7. With the drive carrier handle in open position, gently slide the drive carrier into the enclosure.
Important
Press the release button to push the drive carrier into position.
Proper drive installation ensures adequate grounding and minimizes
vibration. Always attach the drive to the carrier with four screws.
37
Product Manual Hardware Installation