User Manual

607
Product Manual Troubleshooting
“Enclosure Problems” on page 622, “RAID Controller Problems” on page 626, and “Physical Drive Problems”
on page 631.
The Locator feature triggered from WebPAM PROe causes the LEDs to blink on and off for one minute. That
action helps you nd the physical component.
drive cArrier leds
The Vess spins up the disk drives sequentially to equalize power draw during start-up. After a few moments:
• ThePower/ActivityLEDdisplaysbluewhenaphysicaldriveispresent.
• TheDriveStatusLEDdisplaysgreenwhenthephysicaldriveisconguredasamemberofadiskarrayor
asaspare.Whenthephysicaldriveisuncongured,theLEDisdark.
Enclosure Front LEDs on drive carriers
State Power / Activity Drive Status
Dark
Nodriveincarrier Driveisuncongured
SteadyBlue Driveispresent —
FlashingBlue Activityondrive —
Steadygreen — Driveiscongured
Blinking
green
— Locatorfeature
Amber — Driveisrebuilding
Red — Driveerrororfailure
• Conguredmeansthephysical
driveeitherbelongstoanarrayor
itisassignedasasparedrive.
• SteadymeanstheLEDison.
• Blinkingmeansaregularon/off
pattern.
• Flashing
meansintermittentand
irregularon/offpattern.
Drive carrier LEDs
Drive Status LED
Power/Activity LED