User Manual

Table Of Contents
Cautions
• Donotpopulateanyunitwithharddrivesuntilithasbeensecurely
installedintherack.
• Atleasttwopersonsarerequiredtosafelylift,place,andattachthe
unitintoaracksystem.
• Donotliftormovetheunitbythehandles,powersuppliesorthe
controllerunits.Holdthesystemitself.
• Donotinstalltheunitintoarackwithoutrailstosupportthe
system.
•
Onlyaqualiedtechnicianwhoisfamiliarwiththeinstallation
procedureshouldmountandinstalltheunit.
• Mounttherailstotherackusingtheappropriatescrewsandange
nuts,fullytightened,ateachendoftherail.
• Donotloadtherailsunlesstheyareinstalledwithscrewsas
instructed.
•
TherailsavailableforthePROMISEVessunitaredesignedtosafely
supportthatPROMISEVessunitwhenproperlyinstalled.Additional
loadingontherailsisatthecustomer’srisk.
• PROMISETechnology,Inc.cannotguaranteethatthemountingrails
willsupportyourPROMISEVessunitunlessyouinstallthemas
instructed.
Caution
Tolightentheenclosure,removethepowersupplies,andremoveall
harddrivecarriers.Replacethepowersuppliesanddrivecarriers
aftertheunitismountedinyourrack.
MountIng the VeSS encloSuRe In A RAck
This section provides instructions for installing the Vess R2000 enclosure into a rack
30
Vess R2000 Series Product Manual Promise Technologies