User Manual

537
Product Manual Maintenance
uPDAtIng PhySIcAl DRIVe fIRMwARe
ThisfeatureappliesonlytoPROMISE-supportedphysicaldrives.Foralistofsupporteddrives,gotoPROMISE
support: http://www.promise.com/support/.
IfyouhavephysicaldrivesinyourRAIDsystemthatarenotPROMISE-supported,followthermwareupdate
procedure from the drive manufacturer.
webpaM proe
DownloadthelatestrmwareimagelefromPROMISEsupport:
http://www.promise.com/support/ and save it to your Host PC or TFTP server.
ToupdatethermwareonPROMISE-supportedphysicaldrives:
1. Click the Administration tab.
2. Click the Firmware Update icon.
3. Click the PD Firmware Update tab.
4. Choose a download option:
• LocalFilethroughHTTP – Click the Browse button, locate the rmware
image le, click the le to choose it, then click the Open button.
•
TFTPServer – Enter the TFTP Server host name or
IP address, port number and le name.
5. Click the Next button.
6. Click the Submit button.
The progress of the update displays.
When the update is completed a message tells you to reboot the subsystem.
7. Click the OK button.
Restart the RAID subsystem. See “Restarting a Subsystem” on the next page.
Warning
DoNOTpowerofftheRAIDsubsystemduringtheupdate!
DoNOTmovetoanyotherscreenuntilthermwareupdateoperationis
completed!