User Manual

Table Of Contents
528
Vess R2000 Series Product Manual Promise Technologies
restartiNg the eNClosure – ssh CoNNeCtioN
To restart the RAID subsystem:
1. From the Main Menu, highlight Additional Info and Management and press Enter.
2. Highlight Shutdown or Restart and press Enter.
3. Highlight Option and press the spacebar to display Restart.
4. Highlight Submit and press Enter.
A warning message appears.
5. Press Y to continue.
6. Close your SSH session.
7. Wait about two minutes.
8. Re-establish your SSH connection to the Vess R2000 CLU.
See “Making a SSH Connection” on page 412.
If you cannot re-establish a connection, wait 30 seconds and try again.
restartiNg the eNClosure – serial CoNNeCtioN
To restart the RAID subsystem:
1. From the Main Menu, highlight Additional Info and Management and press Enter.
2. Highlight Shutdown or Restart and press Enter.
3. Highlight Option and press the spacebar to display Restart.
4. Highlight Submit and press Enter.
A warning message appears.
5. Press Y to continue.
The screen displays shutdown and startup functions.
6. When the Login: prompt appears, log into the CLU again.