User Manual

525
Product Manual Manage with CLU
StARtIng uP AfteR ShutDown
There are two methods for shutting down the subsystem. Choose one of the following procedures:
• “Starting up the enclosure – Telnet Connection” on page 525
• “Starting up the enclosure – SSH Connection” on page 525
• “Starting up the enclosure – Serial Connection” on page 526
startiNg up the eNClosure – telNet CoNNeCtioN
To start the RAID subsystem:
1. Manually turn on the system by pressing the power button on the front left side.
2. Wait about two minutes.
3. Establish a Telnet connection to the Vess R2000.
If you cannot log in, wait 30 seconds and try again.
4. Type menu and press Enter to open the CLU.
startiNg up the eNClosure – ssh CoNNeCtioN
To start the RAID subsystem:
1. Manually turn on the system by pressing the power button on the front left side.
2. Wait about two minutes.
3. Establish a SSH connection to the Vess R2000.
See Making a SSH Connection.
If you cannot log in, wait 30 seconds and try again.
4. Type menu and press Enter to open the CLU.