User Manual

522
Vess R2000 Series Product Manual Promise Technologies
ShuttIng Down the SuBSySteM (clu)
There are two methods for shutting down the subsystem. Choose one of the following procedures:
• “Shutting down the enclosure – Telnet Connection” on page 522
• “Shutting down the enclosure– Serial Connection” on page 524
shuttiNg dowN the eNClosure – telNet CoNNeCtioN
This function shuts down the Vess R2000 subsystem on a Telnet connection. Additional action is required, as
described below.
Important
IfyouhaveaJBODExpansion,alwayspowerofftheRAIDsubsystemrst.
Then power off the JBOD subsystems.
To shutdown the RAID subsystem:
1. From the Main Menu, highlight Additional Info and Management and press Enter.
2. Highlight Shutdown or Restart and press Enter.
3. Highlight Option and press the spacebar to display Shutdown.
4. Highlight Submit and press Enter.
A warning message appears.
5. Press Y to continue.
The screen goes blank.
6. Wait for no less than two minutes.
7. The subsystem will then turn off the system power one after another.