User Manual

518
Vess R2000 Series Product Manual Promise Technologies
MaNagiNg NetseNd reCipieNts (Clu)
Vess R2000’s Netsend service sends Vess R2000 subsystem events in the form of text messages to your Host
PC and other networked PCs.
netsend reQuireMents
In order to use Netsend:
• NetSend must be running the Vess R2000
• You must provide the IP address for each recipient PC
• The Messenger service must be running on each recipient PC
If your Netsend and Messenger service settings are correct but the recipient PC does not receive event
messages, check the recipient PC’s Firewall settings. Refer to your OS documentation for more information.
Adding netsend reciPients
To add a Netsend recipient:
1. From the Main Menu, highlight Additional Info and Management and press Enter.
2. Highlight Software Management and press Enter.
3. Highlight Netsend and press Enter.
4. Highlight Message Recipients and press Enter.
5. Highlight Create New Message Recipient and press Enter.
6. Typetherecipient’sIPaddressintotheeldprovided.
7. Highlight Message Event Severity Filter and press the spacebar to change severity levels.
The selected level and all higher severity levels of severity are reported.
See the Table below.
8. Press Control-A to save your settings.