User Manual

517
Product Manual Manage with CLU
Event Severity Levels
Level Description
Fatal
Non-recoverableerrororfailurehasoccurred.
Critical Actionisneedednowandtheimplicationsoftheconditionareserious.
Major Actionisneedednow.
Minor Actionisneededbuttheconditionisnotaseriousatthistime.
Warning Usercandecidewhetherornotactionisrequired.
Information Informationonly,noactionisrequired.
deleting A trAP sink
To delete a trap sink:
1. From the Main Menu, highlight Additional Info and Management and press Enter.
2. Highlight Software Management and press Enter.
3. Highlight SNMP and press Enter.
4. Highlight Trap Sinks and press Enter.
5. Highlight the trap sink you want to delete and press the spacebar to mark it.
The mark is an asterisk (*) to the left of the listing.
6. Highlight Delete Marked Entries and press Enter.
MakiNg NetseNd settiNgs (Clu)
By default, Netsend service is set to Manual and its normal status is Stopped.
To make Netsend service settings:
1. From the Main Menu, highlight Additional Info and Management and press Enter.
2. Highlight Software Management and press Enter.
3. Highlight Netsend and press Enter.
4. Highlight Startup Type and press the spacebar to toggle between Automatic and Manual.
5. Press Control-A to save your settings.
To start, stop or restart the Netsend service, highlight
Start, Stop, or Restart and press Enter.