User Manual

516
Vess R2000 Series Product Manual Promise Technologies
MaNagiNg sNMp trap siNks (Clu)
viewing A list Of trAP sinks
To create a trap sink:
1. From the Main Menu, highlight Additional Info and Management and press Enter.
2. Highlight Software Management and press Enter.
3. Highlight SNMP and press Enter.
4. Highlight Trap Sinks and press Enter.
A list of the current trap sinks appears.
Adding A trAP sink
To add a trap sink:
1. From the Main Menu, highlight Additional Info and Management and press Enter.
2. Highlight Software Management and press Enter.
3. Highlight SNMP and press Enter.
4. Highlight Trap Sinks and press Enter.
5. Highlight Create New Trap Sink and press Enter
6. Highlight Trap Sink IP address and press the backspace key to erase the current value, then type the
newIPaddressinthiseld.
7. Highlight Trap Filter and press the spacebar to toggle through the severity levels.
See the Table below.
8. Press Control-A to save the Trap Sink.