User Manual

515
Product Manual Manage with CLU
MakiNg sNMp settiNgs (Clu)
By default, Simple Network Management Protocol (SNMP) service is set to Automatic and its normal status is
Started.
To make SNMP service settings:
1. From the Main Menu, highlight Additional Info and Management and press Enter.
2. Highlight Software Management and press Enter.
3. Highlight SNMP and press Enter.
4. Highlight Startup Type and press the spacebar to toggle between Automatic and Manual.
5. Highlight the following and press the backspace key to erase the current value, then type the new value:
• Port Number–161isthedefault
• System Name–(optional)Typeasystemnameinthiseld
• System Location –Typeacountrynameinthiseld
• System Contact–Typetheemailaddressofyoursystemadministratorinthiseld
• Read Community–Typeacommunitynameinthiseld
• Write Community –private(nochangepossible)
6. Press Control-A to save your settings.
To start, stop or restart the SNMP service, highlight
Start, Stop, or Restart and press Enter.