User Manual

513
Product Manual Manage with CLU
8. Press Control-A to save your settings.
To start, stop or restart the Email service, highlight
Start, Stop or Restart and press Enter.
MakiNg slp settiNgs (Clu)
By default, SLP service is set to Automatic and its normal status is Started.
To make SLP service settings:
1. From the Main Menu, highlight Additional Info and Management and press Enter.
2. Highlight Software Management and press Enter.
3. Highlight SLP and press Enter.
4. Highlight Startup Type and press the spacebar to toggle between Automatic and Manual.
5. Press Control-A to save your settings.
To start, stop or restart the SLP service, highlight
Start, Stop, or Restart and press Enter.
MakiNg telNet settiNgs (Clu)
By default, Telnet service is set to Manual and its normal status is Stopped.
To make Telnet service settings:
1. From the Main Menu, highlight Additional Info and Management and press Enter.
2. Highlight Software Management and press Enter.
3. Highlight Telnet and press Enter.
4. Highlight Startup Type and press the spacebar to toggle between Automatic and Manual.
5. Highlight the following and press the backspace key to erase the current value, then type the new value:
• Portnumber(2300isthedefault)
• SessionTimeOut(24minutesisthedefault.1440minutes=24hours)
• Maximumnumberofconnections(4isthedefault)
6. Press Control-A to save your settings.
To start, stop or restart the Telnet service, highlight
Start, Stop, or Restart and press Enter.