User Manual

503
Product Manual Manage with CLU
5. Press Control-A to save the LUN map.
deletiNg a luN Map (Clu)
Deleting a LUN map prevents the initiator from accessing the LUN while LUN masking is enabled.
To delete a LUN map:
1. From the Main Menu, highlight Additional Info and Management and press Enter.
2. Highlight LUN Mapping and press Enter.
3. Do one of the following actions:
• HighlightLUN Mapping: InitiatorsandpressEnter.
ThenhighlightaninitiatorandpressEnter.
A list of logical drives displays.
4. IntheLUNeld,pressthebackspacekeytoerasethecurrentvalue.
Leavetheeldblank.
5. Press Control-A to save the initiator, port, or target without a LUN map.
ChaNgiNg the aCtiVe luN MappiNg type (Clu)
For FC systems, you can set up an Initiator type LUN map.
For iSCSI systems, you can set up an Initiator type LUN map.
You can set up both LUN map types on the same subsystem but only one LUN map type can be active at a time.
To change the active LUN map type:
1. From the Main Menu, highlight Additional Info and Management and press Enter.
2. Highlight LUN Mapping and press Enter.
3. Highlight Active LUN Mapping Type and press the Spacebar to toggle between choices:
• FCsubsystems,choosetheInitiatoroption.
• iSCSIsubsystems,choosetheInitiatoroption.
4. Press Control-A to save your setting.