User Manual

502
Vess R2000 Series Product Manual Promise Technologies
MAPPing A lun tO An iscsi initiAtOr Or tArget
To map a LUN to an iSCSI initiator or target:
1. From the Main Menu, highlight Additional Info and Management and press Enter.
2. Highlight LUN Mapping and press Enter.
3. Do one of the following actions:
• HighlightLUN Mapping: InitiatorsandpressEnter.
ThenhighlightaninitiatorandpressEnter.
A list of logical drives displays.
4. IntheLUNeld,pressthebackspacekeytoerasethecurrentvalue,thentypetheLUNyouwantto
assign to this target, from 0 to 255.
Each logical drive can have only one LUN and must have a unique LUN.
If you make a error, press
Control-AR to restore the current LUN.
5. Press Control-A to save the LUN map.
editiNg a luN Map (Clu)
Editing a LUN map is the action of assigning a logical drive or LUN to an initiator. By changing the assignment,
you change the initiator’s access.
To edit a LUN map:
1. From the Main Menu, highlight Additional Info and Management and press Enter.
2. Highlight LUN Mapping and press Enter.
3. Do one of the following actions:
• HighlightLUN Mapping: InitiatorsandpressEnter.
ThenhighlightaninitiatorandpressEnter.
A list of logical drives displays.
4. IntheLUNeld,pressthebackspacekeytoerasethecurrentvalue,thentypetheLUNyouwantto
assign to this initiator, from 0 to 255.
Each logical drive can have only one LUN and must have a unique LUN.
If you make a error, press
Control-AR to restore the current LUN.