User Manual

501
Product Manual Manage with CLU
addiNg a luN Map (Clu)
For FC & iSCSI systems, you can set up an Initiator LUN map.
You can set up the LUN map type on the same subsystem but only one LUN map type can be active at a time.
A maximum of 256 logical drives can be mapped to an FC initiator or to an iSCSI initiator.
ToassignaLUNtoanFCoriSCSIinitiator,addtheinitiatorrst.See“Adding an Initiator (CLU)” on page 499.
LUN mapping must be enabled in order to map a LUN. See “Enabling LUN Mapping (CLU)” on page 498.
MAPPing A lun tO An fc initiAtOr
To map a LUN to an FC initiator:
1. From the Main Menu, highlight Additional Info and Management and press Enter.
2. Highlight LUN Mapping and press Enter.
3. Do the following actions:
• HighlightLUN Mapping: InitiatorsandpressEnter.
ThenhighlightaninitiatorandpressEnter.
A list of logical drives displays.
4. IntheLUNeld,pressthebackspacekeytoerasethecurrentvalue,thentypetheLUNyouwantto
assign to this initiator, from 0 to 255.
Each logical drive can have only one LUN and must have a unique LUN.
If you make a error, press
Control-AR to restore the current LUN.
5. Press Control-A to save the LUN map.