User Manual

499
Product Manual Manage with CLU
ViewiNg a list oF iNitiators (Clu)
LUN Mapping must be enabled in order for Vess R2000 to recognize an initiator.
To view a list of FC or iSCSI initiators:
1. From the Main Menu, highlight Additional Info and Management and press Enter.
2. Highlight LUN Mapping and press Enter.
3. Highlight LUN Mapping: Initiators and press Enter.
A list of the current initiators appears.
addiNg aN iNitiator (Clu)
You must add an initiator to the Vess R2000’s initiator list in order to use the initiator to create a LUN.
To add an initiator to the Vess R2000’s list:
1. From the Main Menu, highlight Additional Info and Management and press Enter.
2. Highlight LUN Mapping and press Enter.
3. Highlight LUN Mapping: Initiators and press Enter.
4. Highlight Create New Initiator and press Enter.
5. Typeanamefortheinitiatorintheeldprovided.
• Fibre Channel–AFibreChannelinitiatornameistheWorldWidePortNameof
thedeviceandiscomposedofaseriesofeight,two-digithexadecimalnumbers.
Example:10-00-00-00-c9-73-2e-8b
• iSCSI–AniSCSIinitiatornameistheiSCSInameoftheinitiator
deviceandiscomposedofasingletextstring.
Example:iqn.1991-05.com.microsoft:promise-29353b7
Obtaintheinitiatornamefromtheinitiatorutilityonyourhostsystem.
Notethattheinitiatornameyouinputmustmatchexactlyinorderfortheconnectionto
work.
6. Highlight Save Initiator and press enter.
The new initiator appears in the list.